|
|
| Xantech 48085DWKIT LCD & CFL Proof Dinky Link Kit, White |
| Item# 81207WK |
|
|
|
|
|
|
Overview
|
- Use your IR remote on components behind closed doors or walls
- IR receiver resists interference from LCD TVs, Compact Fluorescent Lighting (CFL) and sunlight
- IR receiver can be mounted on your TV, wall, ceiling or other stealth locations
- IR receiver talk-back LED confirms commands
- IR receiver accepts IR commands from up to 30 feet away
Essential Info
There is no longer a need to leave entertainment cabinet doors open simply to use your IR remote control. The Dinky Link Designer IR Kit makes it possible to control up to four different audio and video components behind solid doors or walls using your existing IR remote. The included Dinky Link compact, IR receiver was designed for mounting in very small spaces and has been engineered specifically to resist IR interference caused by LCD TVs, CFL's and sunlight. The included connecting block supplies power to the IR receiver using the included power supply. The connecting block receives IR signals coming from the IR receiver and distributes the IR signals out to your audio and video components using the included designer IR emitters. The use of this kit will leave you with the clean lines of your entertainment center without looking at unsightly stacks of equipment and cables. You can continue using your existing IR remote with the confidence it will communicate with your AV equipment behind doors, walls and in the presence of your LCD TV, CFLs or sunlight. This product is also available in a Plasma & CFL Proof IR Kit, sold separately. This product is not compatible with Scientific Atlanta cable boxes or AT&T U-Verse boxes. If you have one of these boxes you would need to use the plasma proof versions listed here.
Manuals/Software
What's Included
Dinky Link IR Receiver, LCD & CFL Proof
Connecting Block
Power Supply
Designer Emitters (4)
|
More Info
|
Dinky Link IR Receiver, LCD & CFL Proof
Use this Dinky Link IR receiver when you want to use a small hidden sensor. Xantech's Dinky Link includes a 'talkback' LED so you'll know the command was received and sent to the emitter. This version of the Dinky Link is LCD and CFL proof, so you can install it anywhere in a room with an LCD display and/or CFL lighting. It can be mounted to almost any surface using the included double-sided foam tape.
Extend the reach of your sensor with a 50 foot male to female cable, sold separately. This three-conductor cable has 1/8" male and female plugs molded onto a high quality cable.
Connecting Block
The included connecting block supplies power to the IR receiver, receives IR signals coming from the IR receiver and distributes the IR signals out to four devices using the included emitters. The four parallel emitter ports with 470-Ohm resistors drive four single emitters (included) or four dual emitters, sold separately.
Power Supply
A high-efficiency power supply specified to provide power to the connecting block. A versatile plug has a locking indentation ring providing a secure connection. A small form-factor allows tighter installation and reduces a clumsy rack-installation.
Designer Emitters
The Dinky Link Designer IR Kit includes four single emitters. Each emitter is 10 feet long and plugs into the connecting block via a 3.5mm mono mini plug. The emitters attach to the IR window of your audio and video equipment using clear adhesive film; the emitters also come with three pre-cut adhesive backings for replacement purposes.
|
Specifications
|
Specifications | | General Kit Specifications | | Manufacturer: | Xantech | | Manufacturer Product No.: | 8085DBKIT | | UPC: | 0042777315086 | | Dinky Link IR Receiver | | Manufacturer: | Xantech | | Manufacturer Product No.: | 48085DB | | Dimensions: | 7/16" x 5/16" x 2-1/8" (11m x 8mm x 54mm) | | Infrared Modulation Frequency Bandwidth: | 30 - 60 kHZ | | Nominal Reception Range: | 30 feet | | Nominal Reception Angle: | 55 degrees off axis | | Maximum Current Output: | 100mA | | Maximum Number of Directly Driven IR Emitters: | Up to four connected in series (Use Xantech Connecting Blocks for emitter expansion) | | Power Requirements: | 12 volts DC @ 10mA | | Rejects Interference From: | LCD, CFL, sunlight | | Connecting Block | | Manufacturer: | Xantech | | Manufacturer Product No.: | 789-44 | | UPC: | 042777789443 | | Dimensions: | 2 15/16" W x 1 3/4" D x 13/16" H | | Inputs: | 1 four-terminal VGS block for wired connection; 1 3.5mm mini plug | | Outputs: | 4 3.5mm mini jacks | | Power Requirements: | 12VDC Power Supply | | Power Supply | | Manufacturer: | Xantech | | Manufacturer Product No.: | 781ERGPS | | UPC: | 4277791342 | | Input Power: | 100-240VAC, 0.3A | | Output Power: | +12VDC, 500mA
| | Barrel Connector: | 2.1 mm coaxial secure-fit plug | | Cable Length: | Six feet long | | Emitters | | Manufacturer: | Xantech | | Manufacturer Part No: | 283D | | Quantity Included: | 4 | | Termination: | 3.5mm mono mini plug | | Wire Length: | 10 feet | | Blink: | Visible, red |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|