|
Find Similar Products in:
|
|
|
| Enforcer Miniature 1-Channel RF Receiver, 3A |
|
1 customer rating:
|  |
|
| Item# 70421 |
|
|
|
|
|
|
Overview
|
- Unlock secure doors, control house lights or garage door remotely
- 3 Amp, Form "C" relay contact
- Can learn the codes of up to 15 different transmitter buttons
Essential Info
If you have a home, office or storefront that needs to remain secure by only granting entry to authorized people, the Enforcer Miniature 1-Channel RF Receiver can be part of the solution. The receiver will work with most SECO-LARM transmitters, sold separately, to remotely trigger a relay based device such as electronic/magnetic door strikes, also sold separately. The receiver will also work with most home security systems vehicle alarm system, letting you easily add wireless RF control to almost any relay based device up to 3 Amps. By using a transmitter with this receiver, you can unlock or secure doors, control house lights or garage door remotely and it can even be used to arm or disarm a vehicle alarm and open or close a garage door. It will work with up to 15 different transmitter buttons and also has a CODEBUMP security built -in to prevent criminals from "learning" your codes. This wireless receiver lets you be the decision maker, by letting you add RF remote control to almost any electronic device or system in your home or vehicle.
Manuals/Software
What's Included
Enforcer Miniature 1-Channel RF Receiver, 3A
Owner's Manual
|
More Info
|
Compatible SECO-LARM Transmitters
• 1-Button Wireless Keychain Transmitter
• 1 Button, 1 Channel Slimline RF Transmitter
• 2 Button, 3 Channel Slimline RF Transmitter
• 4 Button, 15 Channel Slimline RF Transmitter
Output Modes
The Enforcer Miniature 1-Channel RF Receiver's relay output can be programmed for one of four different modes, depending on the application: 4-second momentary, 1-second momentary, toggle, and latch. Up to 15 different transmitter buttons can be programmed to each 1-Channel RF Receiver, so every member of your household can access the RF remote control feature.
CODEBUMP® Security
With SECO-LARM's CODEBUMP, so-called code grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.
Controlling Multiple Devices
You can set up multiple RF control devices in your home by using one of the following receivers:
• 2-Channel Receiver
• 4-Channel Receiver
|
Specifications
|
Specifications | | Manufacturer: | SECO-LARM | | Manufacturer Product No.: | SK-910RA | | Range: | Up to 500' | | Operating Voltage: | 11-24 V AC / DC (24 VAC/DC must cut LP4) | | Memory Capacity: | 15 transmitter button codes per channel | | Current Draw: | 5mA standby, 50mA LED flashing @ 12VDC | | Output Mode: | Programmable 4-sec. momentary (default), 1-sec. momentary, toggle (ON/OFF), or continuous | | Output Type: | 3A Form 'C' relay (normally open, normally closed, common) | | Dimensions: | 3 3/16" x 2 9/16" x 3/4" (80 x 65 x 19 mm) | | Frequency: | 315MHz | | Certifications: | FCC |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|
|